Manufactured from pure PTFE filaments and impregnated with PTFE and a special lubricant. This packing is recommended for service where a high resistance to chemical attack is required

MF-255 in .pdf format

This packing is produced from high quality PTFE filaments having a
high graphite content. It combines the extraordinary chemical resistance of PTFE with the high heat dissipation of graphite.

MF-260 in .pdf format

This packing is manufactured from PT.F.E. yarns having a high content of encapsulated graphite. The P.T.F.E. of the yarns give the packing a good resistance to chemical attack. This packing can be considered of universal application except for strong oxidants like nitric acid, cromic, nitrohydrochloric acid and alkalic materials.
Packing very suitable to adjust in every type of stuffing box of rotary and alternative equipment and valves in general.

MF-261 in .pdf format

Gland packing made with special mineral filaments of high reinforced lubrication and chemical resistance reinforced on the corners with a high mechanical resistance synthtetic yarn with P.T.F.E.
Packing has a great lubrication and great mechanical resistance by its form of construction diagonal and the incorporation of synthetic filaments in the corners, furthermore of a excellente elasticity and adaptability to the stuffing box allowing itself by the nature of the product, being to use in damaged or not rectified axes.
MG-973 offers a high mechanical and chemical resistance and to the temperature being able to be used in hugh range of the dynamics and stactic equipment.is the trustworthy and economic solution to the problems of the packing of asbestos, natural fibers and acrylic fibers.

MG-973 in .pdf format

This packing is produced from aramid filaments treated with PTFE and other lubricants. Because the packing has a high abrasion resistance, it is important that the installation instructions are followed carefully to prevent damage to the pump shaft.

MS-315 in .pdf format

A combination of a core of PTFE filaments with a high graphite content and corners of aramid filament gives a packing which is suitable for operation at high pressure and high speeds simultaneously.

MS-360 in .pdf format

This packing has corner braids of a synthetic yarn individually impregnated with PTFE and a core comprising PTFE filaments with a high graphite content.
The synthetic filaments confer a good mechanical resistance without the pump shaft being endangered; and the PTFE with graphite ensure an excellent chemical resistance and heat dissipation. A very flexible packing with universal application.

MF-940 in .pdf format

It is manufactures with metal sheets with a graphite core, being both the metal and the core treated with a mixture of special lubricants.It is recommended for centrifugal pumps handling oils, hydrocarbons distillates, thermal fluid, abrasive and viscuos fluids, mellow liquids and those with tendency to crystallize.

MT-278 in .pdf format

This packing is manufactures with cotton yarns , impregnated both inside and outside with tallow, It is manufactusres by the solid system.
It is packing for general use in hydraulic services both for pumps and valves at low responsability applications.


MV-500 in .pdf format

Compound packing made of special mineral yarns with high lubrication and chemical resistance reinforced on the corners with a high abrasion resistance and toughness synthetic yarn.
This packing is suitable for high-speed centrifugal pumps avoiding the usual problems of starting the machine because of its high content of lubricant easing this process and avoiding shaft damage due to a minimum friction coefficient and rapid heat dissipation.

MG-974 in .pdf format

This packing is manufactured from "E" glass fiber filaments individually lubricated and impregnated with PTFE; after braiding, it is externally coated with PTFE. This is an economical alternative to asbestos / PTFE packings.

MF-350 in .pdf format

This packing is manufactured using high quality natural fiber yarns which are individually impregnated with PTFE and lubricated during the braiding process.
The finished braid is given a final, external treatment with PTFE to give a packing with a low coefficient of friction, which has flexibility and is suitable for use in moderate working conditions.

MF-330 in .pdf format

This packing is manufactured using high quality ramie fiber yarns which are individually impregnated with PTFE and lubricated during the braiding process.
The finished braid is given a final, external treatment with PTFE to give a packing with a low coefficient of friction, which has flexibility and is suitable for use in moderate working conditions


MF-333 in .pdf format

Packing manufactured from white white synthetic filament that is impregnated with P.T.F.E. dispersion during the braiding process. It is produced by the diagonal system. The finished braid is given a final, external treatment with P.T.F.E. and special lubricants in order to make easier the start.
Packing for moderate working conditions with a great flexibility and adaptability.

MF-355 in .pdf format