Gland packing made with special mineral filaments of high reinforced lubrication and chemical resistance reinforced on the corners with a high mechanical resistance synthtetic yarn with P.T.F.E.
Packing has a great lubrication and great mechanical resistance by its form of construction diagonal and the incorporation of synthetic filaments in the corners, furthermore of a excellente elasticity and adaptability to the stuffing box allowing itself by the nature of the product, being to use in damaged or not rectified axes.
MG-973 offers a high mechanical and chemical resistance and to the temperature being able to be used in hugh range of the dynamics and stactic equipment.is the trustworthy and economic solution to the problems of the packing of asbestos, natural fibers and acrylic fibers.

Manufactured from pure PTFE filaments and impregnated with PTFE and a special lubricant. This packing is recommended for service where a high resistance to chemical attack is required

This packing is manufactured using high quality ramie fiber yarns which are individually impregnated with PTFE and lubricated during the braiding process.
The finished braid is given a final, external treatment with PTFE to give a packing with a low coefficient of friction, which has flexibility and is suitable for use in moderate working conditions

Packing made of pure expanded mineral graphite ( 99.85%) , with synthetic carbon yarn insertion in order to widening the rank of use of the expanded mineral graphite, not only in valves but in equipments with centrifugal and alternative movements too.

High tenacity aramid packing combined with PTFE filaments with high lubrication graphite. Inside the packing, a rubber core allows operation during long cycles with the same flexibility and assuring its seal.

This packing has been designed for all type of low temperature valves (T < 260ºC) and especially for knife-gate valves, because of its flexibility and adaptability to their stuffing boxes.

Gland packing for high pressure and temperature , made of expanded mineral graphite and metal insertion with a special lubricant and coating in order to give the lowest friction coefficient at high pressures .

This packing is the solution for those valves where combines at high pressures and temperature operation conditions  (up to 650ºC and 70Mpa ) and where it is recommend a control of the emissions